GAFFER Occupation. Boss. The supervisor, or foreman, or department manager, or works manager, or owner. In short, he who must be obeyed - the boss.
|The gaffer (standing with bowler hat and moustache) |
at Twyfords, Stoke on Trent, England. 1921
GARDEEN FEST The 1986 National Garden Festival, Etruria, Stoke-on-Trent
GARL Secretion in the corner of your eye.
GANZY or GANSEY Dialect. Cardy. Jumper with buttons. May also be gansey, too. Perhaps from Guernsey but not from Jersey, although it is!
GAUMED-UP Dialect. Covered in dirt.
GAWP or GAUP Dialect. Stare at somebody for a long time. So long it starts being rude.
GELLATINE Material used during the process. Murray Curvex printing.
GEORGE WOOLLISCROFT-RHEAD 1855-1920Trained in painting by Ford Madox Brown, the most important and individual artist to be associated with the Pre-Raphaelite Brotherhood. A painter, etcher and designer of stained glass and ceramics, George Woolliscroft-Rhead belonged to the mainstream of the Arts and Crafts movement. He was the elder brother of Frederick and Louis Rhead with whom he collaborated as an illustrator. George Woolliscroft-Rhead learned the technique of etching under the tutelage of Alphonse Legros and was elected a member of the Royal Society of Painter-Etchers and Engravers in 1883. In later years he taught at Putney School of Art from 1896 and subsequently became director of Southwark Polytechnic Institute.
GERROFF Dialect. "You must be joking!"
GETTING Process. Obtaining or winning clay from the ball clay mines of Dorset and Devon, England.
GILDER Occupation. Decorating department. Pottery decorator (man or woman, but women are in the majority) who applies gold decoration to the glazed piece. The decoration may be a simple edge line or a more complex decorative pattern. The decoration is applied with a fine brush called a pencil.
GILDER'S SHELL Equipment. Used by pottery decorators when using liquid 'best gold' or 'bright gold.' Sometimes known as a gold shell, the shape is designed so that the excess gold (which is obviously extremely expensive) from the pencil, drains back into the central well. Made from glass and including the pencil rest.
GILDING The skillfull application of gold decoration to the a pot. May be an elaborate decoration or a simple line to the edge of the pot. (Not to be confused with banding or lining which is the application of a single line of ceramic colour, or with banding which is the application of a band of colour to the edge of a piece). Usually by hand and usually by women. There are various types of gilding:
Also know as solid gilding. Best quality gold is mixed with mercury. It is usually applied to bone china. It is fired at about 730°C to leave pure gold. The gold is dull in appearance when fired and needs to be burnished to produce a bright finish.
Gold leaf was ground with honey to produce a paste. This was applied to the pot which wase then fired at a low temperature. The method, rarely used today, was unsatisfactory as the finish was dull and the gold wore off with handling.
This method is used primarily on bone china. The whole of the piece is masked except for the area to be decorated. Then the item of ware is dipped in acid which removes the glaze on any unprotected areas. This produces a relief effect. After drying best gold is applied with the affected areas.
In this technique, certain areas are raised above the general level of the ware by the application of a paste which hardens during a low temperature fire to produce an elevated decoration. This is then covered with best gold. The technique may involve multiple firings.
This method was introduced in the 1850s. The gold is applied as a liquid suspension and is painted onto the pieces. This is usually done on the gilder’s wheel. When it comes from the kiln, the gold is already bright and needs no burnishing.
|Gilders shell |
Photo: source unknown Date: unknown
GINNETTING Process. Finished warehouse. Knocking the pip or stilt marks off the back of flatware after it has been fired.
GINNETTER An occupation in the finished (glost) warehouse. Usually female. Uses a ginneting tool to knock the pip or stilt marks off the back of flatware after it has been fired. Most usually called a 'sorter'.
GINNETTING MACHINE Equipment. Finished warehouse. Clever machine created to do the work of a ginnetter. Flatware (plates, saucers etc) is loaded into the machine upside down in a stack, or bung. The machine then takes one plate at a time and secures it tight between two arms. The arms spin the plate at high speed while a very sharp and tough machine tool (in a fixed position) is brought down gently onto the back of the spinning plate. The pip or stilt marks remaining on the back of the plate after firing are knocked off by the tool. The finished plates are collected at the end of the machine and automatcally restacked prior to being offloaded and sent on to be inspected in the warehouse. The ginnetting machine was invented and designed by Mr Hemmings.
Invented by Mr Mr Hemmings
Photos: Courtesy Peter Hemmings, son of the inventor. Facilitated by Jayne Packer. Thank you!
GIVE OVER Dialect. Please stop!
GLADSTONE POTTERY MUSEUM. The potters' museum in Longton, Stoke-on-Trent One of the top three English small visitor attractions in 2015. 40 years since the Royal Opening on 24 April 1975 and still winning awards.
Gladstone Pottery Museum
back to top>
GLASSEY Marble made of glass for the game of marbles.
GLAZE A very thin glassy surface or coating applied to pottery ware, the primary purposes of which include decoration and protection, and to make the piece non-porous. Basically glass.Glazes are highly variable in composition but usually comprise a mixture of ingredients that generally, but not always, mature at kiln temperatures lower than that of the pottery that it coats. Ceramic glaze raw materials generally include silica, which will be the main glass former. Various metal oxides, such as sodium, potassium and calcium, act as a flux to lower the melting temperature.
|Unfired glaze, close up on sanitaryware.|
Notice the 'orange peel' effect which disappears during firing
as the glaze melts and flows.
GLAZE FIT The relationship between the thermal expansion of the body and the glaze. Matching the thermal expansion of the pottery body to that of the glaze so as to prevent a glaze fault called crazing. To prevent crazing the glaze should normally be held in compression. If the glaze is expanding or contracting more than the body to which it is attached, something has to give way! Thermal expansion and contraction are not to be confused with fired shrinkage which occurs during firing.
GLAZE FIRE Process. A potter would call this the 'glost fire.' The firing which takes place after the biscuit ware has been dipped or sprayed in glaze.
GLIDER Process. Dipping House. According to Reginald Haggar (in his book "Pottery through the Ages, published by Methuen in 1959) "glider is an old word for glazing" Page 35
GLORY HOLE Sometimes called the 'rat hole.' A room, maybe a basement of a loft, where miscellaneous junk is dumped and forgotten about. Forever!
GLOSS Dialect meaning GLOST.
GLOST Pottery pieces which have been glazed. Adjective of glaze. When ware has been glazed and fired it is described as glost. The oven in which glazed pottery is fired is invariably called the glost oven. Glost printing implies that the pattern is transferred onto the top of the glaze, as distinct from underglaze printing, which is performed before the ware is dipped.
GLOST FIRE Process. The firing after the biscuit ware has been dipped or sprayed in glaze. When glaze is fired it softens progressively as the temperature increases. Then, the constituents fuse together to create the glaze surface.
GLOST HOUSE Dipping house. Department in a potbank where biscuit pots are dipped into tubs of glaze prior to a second fire.
GLOST HOUSE Name of a cafe bar in Longton, Stoke-on-Trent. Opened 2016.
GLOST OVEN The oven used specifically for firing glazed ware.
GLOST PLACER Occupation. Ovens department. A glost placer is the person, usually male but could be female, who places individual dipped pieces into saggars before they are placed (or set in) the oven for firing. For a glost firing he or she would also need to place wads of wad clay on the top rim of the saggar before it was taken into the oven. A glost placer is also the name of the man who fills or sets the oven with saggars containing the ware which had been placed into the saggars by the previous placer. The placer works for the cod placer, his boss.
GLOST WARE Glazed ware. That is biscuit ware that has been glazed and then fired for the second time.
GLOST WAREHOUSE The department where fired glazed ware is sorted and selected prior to either being sent for application of decoration or to the finished warehouse.
GLUT ARCH Part of a bottle oven. Sometimes called a drop arch or houster arch. The brick arch below the firemouth of a bottle oven. Allows the admission of primary air to the burning coal. Also allows the removal of clinker and ash during or after the firing.
GOB Glaze fault. Similar to a dropper.
GOOD FROM OVEN Method of payment on a Potbank which ensured that the firm's owner didn't loose. This system of remuneration allowed payment to the workers only when goods emerged perfect from the oven. Unless the piece was faultless no one who had been involved in creating the piece was paid. In 1844 William Evans wrote "Good from Oven. A thief's instrument, a potter's curse, and a trade's scourge!" This system was open to abuse but was not finally abolished until 1964.
GOLD Material used during the process. Decoration.
- Best gold - a suspension of gold powder in oils mixed with a flux and a mercury salt extended. This can be applied by a painting technique. From the kiln, the decoration is dull and requires burnishing to reveal the full colour.
- Acid Gold – a form of gold decoration developed in the early 1860s by Mintons Ltd, Stoke-on-Trent, England. The glazed surface is first etched with diluted hydrofluoric acid prior to application of the gold. The process demands great skill and is extremely expensive.
- Bright Gold – consists of a solution of gold sulphoresinate together with other metal resonates and a flux. Immediately after firing the gold looks bright and glossy/shiny and therefore requires no burnishing.
- Mussel Gold – an older method of gold decoration. It was made by rubbing together gold leaf, sugar and salt, followed by washing to remove solubles.
- Spanish Gold - this may have been peculiar to the Doulton Company of Burslem. No further details available.
back to top>
GOLD SCOURING Process. Decorating department. Another name for burnishing.
GOLD SHELL Equipment. Used by pottery decorators when using liquid 'best gold' or 'bright gold.' Sometimes known as a gilder's shell, the shape is designed so that the excess gold (which is obviously extremely expensive) from the pencil, drains back into the central well. Made from glass and including the pencil rest.
GOLD STAMPING Process. Decoration. Applying a old decoration to a glazed piece by means of a rubber stamp. A tad crude.
GOOD FROM OVEN A payment system used in the Potteries. This system of remuneration allowed payment to workers only when goods emerged perfect from the oven. The ware passed through many hands before firing, any one of whom might have caused some imperfection – but unless the piece was faultless no one was paid. The imperfect pieces were sold as seconds and the pottery owner kept the income. This system was open to abuse by the pottery owner. Abandoned by some of the better class firms such as Copeland and Minton in the 1870s but not finally abolished in 1964.
GOOSE LOW Dialect. Road sign on dangerous bends. Don't go so fast!
GRACE Dialect. Keeps the wheels moving.
GRADING Process. Ovens department. Measuring the exact fired size (diameter) of flatware prior to decoration. The fired size of all pottery is not definite. Since clay shrinks during firing the finished piece can vary depending on the exact recipe of the clay body and the exact firing condition. (This is what makes pottery manufacture so exciting and so frustrating!) High end, luxury, pottery products such as bone china plates need to be graded so that the correct and exact size of litho decoration can be applied. Graded plates can be seen on the back of some pottery flatware. Wedgwood used ( uses?) a green coloured letter from a to E depending in size. C is the most common.
GRADELEY Dialect. Great! "That's right gradeley."
GRAFTER Equipment. Ovens Dept. Saggar making. A flat D-shaped tool called a grafter was used to slice a flat piece of saggar marl from the dump ( large lump of saggar marl clay) before use.
GRAIN Dialect. Green.
GRANITE WARE Name used for hard, semi-vitrified earthernware. Popular in the US.
GRATE Part of a bottle oven. Formed by the firebars and checkers above them. An area for the burning coal.
GRATE! Dialect. Wonderful! Superb! Terrific! Smashing! Nice!
GRAUEN Early local word for Cornish stone. See growan stone and moorstone.
GRAUNCH Potteries dialect word. Grind - as in teeth! At night, in bed, disturbing!
GRAVER Equipment. Engraving tool. Decorating shop. A small tool with V - shaped section used to engrave lines on a copper plate to create part of the decoration. Also know as the burin. (Also the occupation?)
GRAYS A potbank - Grays Pottery www.grayspottery.co.uk
GREAT WHEEL Equipment. Potting department. The throwers hand-turned wheel.
|Spode's great wheel. |
On show at Gladstone Pottery Museum, Longton, Stoke-on-Trent, England
back to top>
GREEN Unfired. Pottey is green when it is still in the clay state but dry and hard not plastic. Before it is fired.
GREEN SPOT Pottery fault. Can be serious in the manufacture of sanitary fireclay. The green spot is large (about an inch across - 2.5-3 cms diameter) and of an intense colour. Main cause is the presence of copper in the raw clay or from contamination by a particle of copper.
GREENWARE Unfired ware. Dry and harder than leather hard. When it has been finally inspected it is ready for firing.
GREEN STRENGTH Description of the mechanical strength of greenware which is unfired, dry and reasonably hard. Clays of high green strength handle well during production, thus lowering losses in handling. Porcelains often have very low green strength but stoneware and fireclay typically have high green strength. Ball clays can be added to a recioe to impart green strength. Kaolin has low green strength. Binders are also added to bodies to increase green strength. Bodies of high green strength dry slower.
GREEN HOUSE (GREY NICE) Department in a potbank. Heated room containing greenware which is constantly drying and which is ready for inspection (looking ever) and storage prior to firing.
GREW DIN Dialect. Filthy and ingrained dirt.
GREY NICE Dialect. Nice and warm place under glass for growing plants. Also the department in a potbank where clay pieces are dried and looked over before the biscuit fire.
GRINDER / POLISHER Occupation. Biscuit or Glost Warehouse. Grinds or polishes off imperfections on biscuit or glost ware, usually as part of the rework process, using a lathe and grinding wheel. The polisher removes pin marks from back of flat ware items that won’t go through a ginetting machine.
GRINDING PAN. Machine. Sliphouse. Machine used to reduce the particle size of ceramic raw materials.
GROOD IN Dialect. Ingrained dirt. Grimed. Possibly 'grued' is a spelling of it too.
GROG Component of pottery body recipe. Filler. Pre-fired clay or coarse ceramic powder. Can be used to improve the texture or strength of a body. Also improves thermal shock resistance. Being pre-fired all the clay and firing shrinkage has already been taken out of it.
GROG Material. Sometimes of vermiculite. Used in the ovens department - tunnel ovens. The material in the channels/troughs on the tunnel/muffle kilns to seal the gap between the kiln car base and the sides of the kiln. Many thanks to David Broadhurst for this suggestion. March 2016
GROUNDED Ground layed.
GROUND LAYING or GROUNDLAYING Process. Decorating department. Application of a uniform coat of colour, a solid area of colour. This is the process by which solid colour, forming part of the decoration, is laid down on the piece pottery before being fired. Much more even masses of colour can be obtained by this process than by aerographing. Those parts of the ware which are to be laid with colour are first covered with an adhesive, usually oil based, and very tacky. Powdered colour is then dabbed on to it with cotton wool. Parts of the ware which are not to be coloured are suitably protected by a resisting medium, which is afterwards washed away before the ware is fired. Creates a very even covering. Ground-laying is an expensive process and is mainly reserved for decorations upon better-class wares. Looks rich and luxurious. Also visit SPODE ABC> for information about Ground Laying specific to the Spode Factory.
|Wedgwood Bone China - Black Tonquin - ground laid|
GROUND LAID A pot which has been decorated using the groundlaying technique.
GROWAN CLAY Component of pottery body recipe. The word growan is found in the Cornish china clay industry to mean unevenly decomposed granite.
GROWAN STONE Component of pottery body recipe. Cornish stone.
GUBS Dialect word. Gloves! "Arm puttin me gubs on"
GUM ARABIC Material used in slips and glazes. Also known as Acacia gum and reduces the surface tension of liquids.
GYPSUM Material. A common white or colorless mineral (hydrated calcium sulphate) used to make Plaster of Paris which is in itself used for mould making.
back to top>